How to Replace Your Bicycle Bottom Bracket

A bottom bracket is the part of a bicycle where the pedals attach to the bike and the crankset turns. It also houses the bearings that allow the crankset to rotate smoothly. Most bottom brackets are made of metal, but some are made of plastic. Bottom brackets wear out over time and will need to be replaced. Replacing a bottom bracket is not a difficult task, but it does require some basic bike maintenance skills. Here are the steps to replace a bottom bracket: 1. Remove the crankset from the bike. This will require a crank extractor tool. 2. Remove the bottom bracket from the frame. This will require a bottom bracket wrench or an adjustable wrench. 3. Clean the bottom bracket shell with a degreaser. 4. Install the new bottom bracket. This will require a bottom bracket installation tool. 5. Re-install the crankset. 6. Adjust the chain tension and check for any binding in the crankset. Follow these steps and you will have a new bottom bracket installed in no time.If you're a regular bicyclist, you know that eventually you'll need to replace your bicycle bottom bracket. The bottom bracket is the part of the bicycle that the pedals attach to, and it's subject to a lot of wear and tear. Fortunately, replacing a bottom bracket is a relatively easy task that you can do yourself with a few simple tools. Here's a step-by-step guide to replacing your bicycle bottom bracket: 1. Remove the old bottom bracket. This will require a bottom bracket removal tool, which is available at most bike shops. With the removal tool, simply unscrew the old bottom bracket from the frame. 2. Clean the bottom bracket area of the frame. This is an important step to ensure that the new bottom bracket will be properly installed. 3. Install the new bottom bracket. This will require a bottom bracket installation tool, which is also available at most bike shops. With the installation tool, simply screw the new bottom bracket into the frame. 4. Reattach the pedals. Once the new bottom bracket is installed, you can reattach the pedals and get back on the road! Replacing a bottom bracket may seem like a daunting task, but it's actually quite easy. With the right tools and a little bit of know-how, you can do it yourself in no time.Assuming you have followed the steps in the blog post, you should now have a new bottom bracket installed on your bicycle. Give yourself a pat on the back—this is a difficult task that takes some time and patience to complete. Remember to grease everything before you put it back together, and to tighten all the bolts to the correct torque. With a new bottom bracket, your bike should feel like new again and be ready to ride for miles and miles.
Back to blog